Audio issue a couple of weeks after Moreplay Upgrade [resolved]

[Galluch57]

Since I have replaced the 4 transistors in that B/C section of the board, I am suspicious about the 2 LED’s that don’t illuminate. I will check the soldering joints. TY

 

[Paul Birkeland]

The LEDs are sensitive to excessive heat, so you could try replacing them for the sake of thoroughness. 

 

[Galluch57]

I will. The two on that section of the board don’t glow. Could they possibly be the cause of my issue?

 

[Paul Birkeland]

It's very rare for one of our LEDs just just randomly stop working.  Maybe I've seen that 1-2 times in 20 years.  Generally there would be some other issue that takes them out as part of the failure process.

 

[Galluch57]

Paul -
Very happy to report that after replacing the 2 LED’s that weren’t glowing on the B/C area of the board, the voltages  tested in spec and the preamp sounds brilliant again!! Thank you for all your help & patience!!