220v BeePre

[Demsy]

My plan is to get the BeePre in the near future. Could Doc, PJ or PB tell me, do I need to crank the line voltage to up 255v, as my 220v Paramounts, in order to maintain the correct filament voltage? I use an automatic regulator to have a constant 230v and another manual slide regulator after it to bring the voltage up to 255v for the Paramounts. I hope either one of the two voltages would be the correct voltage for the 220v version of the BeePre.

 

[Paul Joppa]

The BeePre is fully regulated and designed to work with +/-10% voltage variation. 220v is "on the edge" but 230v should work just fine.

 

[Demsy]

Thanks for the explanation, Paul