Power Line voltage test [resolved]

[mistercheah]

I am unable to obtain any values during the powerline test. So to ensure the meter and the power supply outlets are not faulty, I tested the IEC inlet for my Crack. The result was the correct value i.e. 240V.

 

[ccmccull]

One idea: make sure you installed the fuse properly. It doesn't go in the closed square tube. The way to know you have it right if to make sure it'll contact the metal tabs inside the compartment.

 

[mistercheah]

One idea: make sure you installed the fuse properly. It doesn't go in the closed square tube. The way to know you have it right if to make sure it'll contact the metal tabs inside the compartment.

Yes, it was the fuse. Problem resolved. Thanks.