I would recommend turning it up all the way. The only parts on that board that aren't going to like a ton of heat are the LEDs, but they will take solder very quickly.
My crack is smoking [resolved]
- Thread starter Huffstutler
- Start date
Huffstutler
New member
Okay, thank you so much for the help, after fixing that, all the LEDs are on and there is no smoke. The only issue I have now, is that when testing the headphone jack voltage, it jumps up to 22 volts for a split second instead of the 9 recommended. The volume knob is turned all the way down, is 22 okay, or do I have another problem?
Huffstutler
New member
Also, I did the voltage check and everything cleared
The voltage spike with the Speedball is a little higher, but it's brief in comparison to the stock circuit.
