Mainline fine attentuator question

[atul.mehta6]

Hello All,

I am in the process of building my Mainline and I am right now on Page 57 of the manual. I was measuring the resistance after soldering both the 1472F resistors. Is it normal to get a reading of 0 ohms between the terminals 1 and 7 of the fine attenuator and their closest lower lug (where the resistors are soldered)? or did i do something wrong?

Thanks,
Atul

 

[Paul Birkeland]

If you rotate the switch, that continuity will likely move to another pair of terminals.  This is normal and how the switch functions.

 

[atul.mehta6]

Thank you Paul!