Purchased a Mk1 quickie late last year,did not assemble in a hurry left the quickie as stock with the exception of the volume control replaced with a fact pot from a Basie preamp and two capacitors with some icons i had lying around as well as the output capacitors with some ans spa with silver output leads.Impressed i certainly was ran for six months then installed JCS sound quality improved vastly,happy with this state of affairs then having read other posts wondered what could be achieved by replacing certain parts within the quickie. Sourced all the parts including a new toplate by the time i had done ended up with all the parts to build another quickie,didn't want to rebuild the first one anyway this i used as i built the next quickie assembly was more problematic as some of the parts were larger than in the original ,preserved as seen in pictures with black top plate spent as much as i dared.Sound quality the best that i have heard from a preamp as i have owned a few over the years sound now open detailed midrange to sink into vast depth and wide soundstage and insight bass fast tuneful taught and when required forceful ,treble detailed smooth and in place with other frequencies .Aim not very good at hifi speak but anyone wanting a good preamp with bags of potential can do a lot worse than buy one of these replace standard parts with boutique parts transforms this preamp into something else,aim very pleased.
Parts replaced phono jacks wbt next gen ag.
resistors texas instruments z foil resistors.
Output capacitors with clarity cap mr 400v as smaller.
Oscon capacitors 600uf 5 volts work very well.
Arak Kallas silver plated 48 step volume control with zfoil series resistors.
Silver wire wherever possible.
Pjccs wired with silver wire 4k resistors replaced with z foil resistors.
Large aluminium knurled knob courtesy of Arek Kallas .
Ps soldering solid but not as neat as many contributors to this forum also picture taking not my speciality.
Parts replaced phono jacks wbt next gen ag.
resistors texas instruments z foil resistors.
Output capacitors with clarity cap mr 400v as smaller.
Oscon capacitors 600uf 5 volts work very well.
Arak Kallas silver plated 48 step volume control with zfoil series resistors.
Silver wire wherever possible.
Pjccs wired with silver wire 4k resistors replaced with z foil resistors.
Large aluminium knurled knob courtesy of Arek Kallas .
Ps soldering solid but not as neat as many contributors to this forum also picture taking not my speciality.