0 ohm resistors

[joralieu]

Can I use a wire instead of the 0 ohm resistors on page 54 ?

 

[Paul Birkeland]

You can, but you don't need to. 

 

[joralieu]

Okay, why are they used there.

 

[Paul Birkeland]

Stripping really short pieces of the teflon covered wire can be really difficult, so using a jumper is preferable.

 

[joralieu]

Thanks

 

[Tubegopher]

OK Paul... a little Deja Vu! It does cause some questions ;D

 

[Paul Birkeland]

They've been in the kits for 7 years, but there does seem to be a fair amount of recent interest.