Grainger49
New member
DP3T is Double Pole Tripple Throw. Those are one and the same.
what if I wanted to add a third input to my Quickie...
- Thread starter denti alligator
- Start date
denti alligator
New member
OK, so if I get one of those, plus two extra RCAs, then I should be good to go? Just wiring to stress over?
I see there are six terminals to wire, which I assume means two of these will take the inputs *and* one of the sets of three outputs.
I see there are six terminals to wire, which I assume means two of these will take the inputs *and* one of the sets of three outputs.
Adrian
New member
I added 3 switched outputs to my submissive.
This might help with your decision:
http://bottlehead.com/smf/index.php?topic=7864.msg75569#msg75569
This might help with your decision:
http://bottlehead.com/smf/index.php?topic=7864.msg75569#msg75569
denti alligator
New member
Well, I really don't know what I'm doing here, but I think this should work:
http://www.mouser.com/ProductDetail/NKK-Switches/M2044SS1W01/?qs=sGAEpiMZZMsqIr59i2oRcjnUQmNlpKWknidTKccPOa4%3d
The wiring is another issue. Anyone be so kind as to link to the RCA jacks I should get at Mouser?
http://www.mouser.com/ProductDetail/NKK-Switches/M2044SS1W01/?qs=sGAEpiMZZMsqIr59i2oRcjnUQmNlpKWknidTKccPOa4%3d
The wiring is another issue. Anyone be so kind as to link to the RCA jacks I should get at Mouser?
4
4krow
Guest
I don't do much business with Mouser, but I have found some RCA jacks that are quite a deal at Ebay. They are offered by Manley Labs for $5 each. I have been using them for awhile now with no regrets.
denti alligator
New member
Well, I want to just make one order, and hopefully save on shipping, too.
These look right. Unless someone says "wait! those won't work!" I'm gonna order these:
http://www.mouser.com/ProductDetail/REAN-Neutrik/NYS367-2/?qs=sGAEpiMZZMv0W4pxf2HiV971L5dkS74PmXnOE1s2ZlQ%3d
http://www.mouser.com/Search/ProductDetail.aspx?R=NYS367-0virtualkey56810000virtualkey568-NYS367-0
These look right. Unless someone says "wait! those won't work!" I'm gonna order these:
http://www.mouser.com/ProductDetail/REAN-Neutrik/NYS367-2/?qs=sGAEpiMZZMv0W4pxf2HiV971L5dkS74PmXnOE1s2ZlQ%3d
http://www.mouser.com/Search/ProductDetail.aspx?R=NYS367-0virtualkey56810000virtualkey568-NYS367-0
denti alligator
New member
Ok, ordered these. If anyone wants to have a look at the data sheet for the switch
http://www.mouser.com/ds/2/295/MtogglesBushing-31423.pdf
and give me some advice on wiring, I would be grateful. My head is already reeling trying to make heads and tails of it.
http://www.mouser.com/ds/2/295/MtogglesBushing-31423.pdf
and give me some advice on wiring, I would be grateful. My head is already reeling trying to make heads and tails of it.
denti alligator
New member
OK, got my switch (M2044 is the model). I would be very grateful for any pointers on wiring! I really don't know what I'm doing here.
Picture should help.
My guess:
line out = 2(red)/8(black)
RCA(1) in = 6(red)/12(black)
RCA(2) in = 4(red)/10(black)
RCA(3) in = 1(red)/7(black)
I take it "external connection" means I need to solder in a jumper wire?
Picture should help.
My guess:
line out = 2(red)/8(black)
RCA(1) in = 6(red)/12(black)
RCA(2) in = 4(red)/10(black)
RCA(3) in = 1(red)/7(black)
I take it "external connection" means I need to solder in a jumper wire?
Attachments
denti alligator
New member
2wo said:
It's the one circled in the picture. 12.
denti alligator
New member
12 pins underneath. 3 positions.
Or am I misunderstanding your question? I answered 12 and the picture shows 12.
Or am I misunderstanding your question? I answered 12 and the picture shows 12.
denti alligator
New member
Well, I soldered based on my guess, and it appears to be working!
Not bad. Three inputs!! Very happy, so far.
Not bad. Three inputs!! Very happy, so far.
