Valab 23 step volume attenuator

ZacharyP said:
Could you post pics of the solder filled holes?

Thanks,

ZP

Pot-side.jpeg


Maybe the wires don't go in the holes on this one, but are soldered between the two "dots" next to the G/out/in?
 
I think what you suggested is a good idea.  Go with that then after the wires are in add a tiny touch of your solder.  I always count to three after the solder is all liquid then remove the iron.
 
That is different than mine looked.  If you run into any trouble post here and I will post pics of mine and help you trouble shoot it. :)
 
Umm, I looked at the eBay listing again, and the pot I purchased is supposed to be new

http://www.ebay.com/itm/Valab-23-Step-Ladder-Type-Attenuator-Potentiometer-100K-Log-Stereo-/281654181885?

It's pretty clear it isn't, so I sent a message to the seller. Anyone work with "vintage_audio_lab" on eBay before?
 
I have brought a number of items off of them in the past and have always been happy with the quality of the items I have received.
 
JamieMcC said:
I have brought a number of items off of them in the past and have always been happy with the quality of the items I have received.

Good news. Hopefully they will make it right. I think I'm right in noting the pot isn't new. I assume a new one would not have old solder on the connections.
 
I have bought a few things from them and have had no problems.  As many Bottleheads who have used them I would expect you get a good response from them.
 
I heard back, and true to form, very good customer service.
You got a used potentiometer, not a new one.
My assistant take potentiometer I used for my sample preamp.
He do not check product carefully enough.
They gave me a full refund and said I could keep the pot. I left good feedback for them
 
AllanMarcus said:
I heard back, and true to form, very good customer service.They gave me a full refund and said I could keep the pot. I left good feedback for them

They are a great little outfit, aren't they?  Glad it all went well.
 
Back
Top