J jorgen83 New member Mar 15, 2015 #1 I just finished my build, and all resistances are correct, except for terminal 6 and 10, which both come up as 0 ohm instead of 2.4 K ohms. I did connect the open terminals of the jack plug to ground, perhaps that gives different readings?
I just finished my build, and all resistances are correct, except for terminal 6 and 10, which both come up as 0 ohm instead of 2.4 K ohms. I did connect the open terminals of the jack plug to ground, perhaps that gives different readings?
J jorgen83 New member Mar 15, 2015 #2 Ah yes, so I just found the answer. 6 and 10 are shorted to ground so 0 is correct
