Resistance Check on 52

[Paul Birkeland]

The A4 & B4 terminal values are still off- A4 is still reading at 25 @ 40k and B4 was reading 80 @ 400k-

Is this still what's happening?  This isn't really possible if all the resistors measure properly. 

 

[Emoreigns]

Ya, unfortunately that still is the situation I am dealing with-  After going through and taking all those pictures and marking up the pdfs with the resistance measurements last night, I am more perplexed . 

What do you think is my next step?

 

[Paul Birkeland]

I see ~440 ohms on A1/A4/B1/B4 on those photos.

 

[Doc B]

Your 300B socket numbering for pin 3 and 4 is reversed. Suggest you check that and relabel the pins. That should solve your issue.

 

[Paul Birkeland]

Good catch!  I seem to remember doing that once in a manual...

 

[Emoreigns]

Oh fantastic! I'll double check this tonight!!! That would be fantastic!!!

Thanks as always gentlemen!

 

[Emoreigns]

Yepp- That did the trick! Got it all done now minus sanding and finishing the box with some semi gloss clear coat! Thanks again gentlemen for all your help