Resistance check 12 and 14 [resolved]

[RestoredSparda]

Howdy! My apologies if I should not be starting a new thread...

All resistance checks are find except for terminal 12 and 14. They are both reading absolute zero. Wrong wiring to the c4s board?

 

[Paul Birkeland]

12 and 14 have no connections.  Is your meter showing zero or "OL"?

 

[RestoredSparda]

Usually my meter will read 00.1ohm for those indicated to read zero.  In the instructions 12 and 14 are starred, so I assume should have some value?

I'm getting no reading on 12 and 14.  If I touch red probe to the top plate I read 00.1ohm 12 and 14 do not change the meter reading from the default 0.L

 

[Paul Birkeland]

"OL" means "Over Limit", which is the opposite of zero.

 

[RestoredSparda]

My apologies. Still learning (clearly)!  Is this an issue, or safe to proceed?

 

[Paul Birkeland]

It's safe to proceed. 

 

[RestoredSparda]

Great.  Thanks again for your help. I appreciate it.

 

[RestoredSparda]

Just looping back to let you know that all voltages have checked out fine, tubes are biased, and she is up and running. âš¡