Ready to give up!! Cannot solder this Crack

[Doc B]

We used the cheapo Stahl SSVT under a different guise for a S.E.X. kit building class ten year ago, one for each student. They were pretty bad, as I recall I had to pull out one of my bigass Wellers to help the guys solder some of the bigger stuff like binding posts.

Not that this is much help but I had the impression that a lot of the problem was that the tip just didn't transfer heat very well. I don't know if there are any aftermarket tips for that iron that might be better.

Oh yeah, I seem to recall that the black plastic ring around the iron holder is held against a spring and will probably fly off at some point. Seems like we had 'em popping off  a lot of the stations over towards the end of the class.

 

[NightFlight]

Search for "weller" on Amazon and pick. my first iron was for this project and I got the WES51. I couldn't be happier and I'm hooked on soldering.

 

[Chris]

Right, and how much did it cost you?? a thousand dollars??

 

[Mike B]

This is a good iron, has adjustable heat and on sale for thiry-five bucks.  I've been using mine now for 7 years.

http://www.testequipmentdepot.com/weller/solder/wlc100.htm?ref=gbase&gclid=CN2A8ZX2_boCFQpgMgodYV8ANg

 

[Chris]

Exactly... thank you Mike... For the sake of being flamed by whoever wants to.... GUYS.... we are talking about LITTLE money here...WHY would you NOT want to spend just a little more money on quality ($30 more) and have an awesome experience... ???  And , yes, I was in college (7 years, driving a white pinto wagon dubbed :"the urban assault vehicle"  because a guy hit me, "his fault", and I spent the insurance money on books instead of fixing the car).. BUT I still would have bought a proper Soldering station to do my Bottlehead kits if they would have existed at the time... BECAUSE??? I want a good experience and not a pain in the ass load of BS that I would get with a what?? 10? 15? dollar product??  I only say this because I care about your happiness.... sorry

 

[Doc B]

This is an interesting philosophical point. Because we put out inexpensive kits there can be a hope that you can get what you want from them for only the price of the kit. But that's not realistic. You do have to budget for tools too. Buying tools for that first kit that can seem to throw the budget out of kilter, and it's hard to know if one will like the process enough to keep building kits.

The problem is just as we are finding here. If the tools aren't good enough the experience can become somewhat frustrating. So my advice is if you can't borrow a good solder station buy a good iron with the idea that being a good one it will be easy to sell if you decide kit building isn't your thang. That way it won't be the frustration of using crappy tools that influences your decision about whether kit building is fun or not.

For anyone local starting on their first kit  (I know this is just a small fraction of our customers) we would be happy to have you stop by for a free soldering lesson.

 

[Chris]

Perfectly said,  Inexpensive kits BUT with MAXIMUM value....... I am NOT being condescending nor am I a know it all..  But, I will bet that audiophiles will spend MORE on caps and cables, isolation feet etc... than a GREAT quality soldering station which is the FIRST line of quality sound assurance... DOC himself already posted a sticky regarding the importance of QUALITY solder joints in the assurance of the BEST sound reproduction possible... PJ painstakingly designed the circuits for maximum sound quality and we are going to "buzz" them up with a 10 buck POS?..... OR spend maybe 35 to 50 dollars (only) on a superb bit of iron ensuring we get the MAXIMUM value out of PJ and DOC"S designs  for YOUR listening pleasure????.... I dont know, to me , it is a no brainer.... And  I, of course, mean NO disrespect to ANY of you who , in the beginning, went the cheap route.. not in the least.. I have done so myself in the past....and have learned the error of my ways...

 

[Paully]

Following Docs advice made all the difference in the world for me.  I didn't know how to solder and certainly didn't have the tools.  Pairing up with Grainger, an experienced electrical engineer (though that depth of experience certainly isn't necessary) who has the patience of a saint and a really cool and well stocked workroom made my first build a lot of fun and got me hooked.