Quickie 1.1/PJCCS Question

[willspeed]

Hey guys,

I'm looking at the Quickie manual on page 20 - and by looking at the pictures, shouldn't step 4 on this page state to wire from B2 to 6L?

Thanks,

Will

 

[4krow]

If I read the schematic correctly, tube pins 2,4,6 are the same electrically. Is that the question you are asking?

 

[Magnetron]

I went with pin 6 on both tubes, for uniformity.

 

[Paul Birkeland]

No, the wire should be run as indicated.

If you install the PJCCS, this will aide in installation.

-PB