R Ranger D New member Today at 5:49 PM #1 I am testing my power supply. All readings for 6.3v, B++1, B+1 and B+2 are perfectly within acceptable range. However, B++2 is reading -0.001. I have traced my steps and all seems to be ok. What am I missing? What should I be looking for? Thanks!
I am testing my power supply. All readings for 6.3v, B++1, B+1 and B+2 are perfectly within acceptable range. However, B++2 is reading -0.001. I have traced my steps and all seems to be ok. What am I missing? What should I be looking for? Thanks!
R Ranger D New member Today at 8:22 PM #3 Here are a few assembled photos. Attachments IMG_0240.jpeg 1.9 MB · Views: 5 IMG_0241.jpeg 2.6 MB · Views: 5 IMG_0242.jpeg 2.5 MB · Views: 5
Paul Birkeland Moderator Staff member Today at 9:38 PM #4 One 8.2K resistor may need a little more heat/solder on that board. -PB
