Skipperrik
New member
The LED between the ground pin and A3 refuses to glow. Re-flowing the solder hasn't brought it to life.
Below are the voltage specs/values:
C4S
IA 150/147.7
IA 60-90/71.2
KregA 3-6/7.6
bKregA 150/147.7
IB 150/147.8
OB 60-90/39.2
KregB 3-6/4.0
bRegB 150/147.8
High Current 1
1A 190/193.7
OA 150/149.7
bA 0/0.4
IB 0/0.3
OB 90-110/76.5
bB 150/147.9
High Current 2
1A 190/198.7
OA 150/149.6
bA 0/0.4
IB 0/0.5
OB 90-110/95.6
bB 150/149.6
If you could help me figure this one out I would appreciate it!
Below are the voltage specs/values:
C4S
IA 150/147.7
IA 60-90/71.2
KregA 3-6/7.6
bKregA 150/147.7
IB 150/147.8
OB 60-90/39.2
KregB 3-6/4.0
bRegB 150/147.8
High Current 1
1A 190/193.7
OA 150/149.7
bA 0/0.4
IB 0/0.3
OB 90-110/76.5
bB 150/147.9
High Current 2
1A 190/198.7
OA 150/149.6
bA 0/0.4
IB 0/0.5
OB 90-110/95.6
bB 150/149.6
If you could help me figure this one out I would appreciate it!