Finished the BeePre and Eros a few weeks ago. I have been waiting until this week on an adaptor plate for my DIY open baffle speakers to allow me to put my new Voxativ 1.6 speakers into the holes previously occupied by Fostex 208s. The signal goes out from the BeePree into a Marchand crossover I built several years ago. My Paramour 2A3s drive the Voxativ full range drivers supplemented by Fostex super tweeters. The Voxativs are mounted on an open baffle that acts as a mechanical high pass filter at approximately 250 Hz. A pair of vintage Heathkit UA-2s drive the 15" Fostex woofers. It sounds decent, especially considering how much of it is DIY hand crafted.
Many thanks to Doc and to everyone who helped with my trouble shooting efforts on the Forum.
Many thanks to Doc and to everyone who helped with my trouble shooting efforts on the Forum.