Moreplay manual issue ? Page 51 bottom step

[smodtactical]

On that step it says to attach and solder at the forward lower lug. But then on page 52 third step we are supposed to solder in a 33k ohm resistor in that same tab?

Is therefore an error in the first instruction (shouldn't solder) or am I making a mistake?

Thanks!

 

[ccmccull]

I think you're not making a mistake

https://forum.bottlehead.com/index.php?topic=13678.msg124973#msg124973

 

[Doc B]

Thanks, I'll get the update made. Between the quantity of "attach and solder" instructions and the quantity of "copy and paste" commands to make a manual these kinds of things can happen when editing.

 

[ccmccull]

Hi Doc, I don't know how you feel about volunteers on these kinds of things, but I'd be happy to help out editing for you.

 

[smodtactical]

Thanks CCM

 

[lawrence.solon]

Correct me if I'm wrong, but isn't page 30 incorrect as well? Or is one supposed to solder the STP to 6 and 7 then attach the resistor to 6 and 7 and solder again?

 

[atul.mehta6]

Couple more minor errata in the manual.

1. On page 13, step 1 it says to install the #6 solder lug between the volume and the balance pot. It should be between the Input Selector and the balance pot.
2. There are all these 0.1uF 100V Z5U caps that we attach to the ground lugs. The manual is missing the step where it says to solder the ground lug connections once it is all done.