I have just finished building my Mainline, and at the very last voltage check my build doesn't seem to hit the mark at all the 275V measure points, in particular, the +275vDC on the PSB, the IA on both the C4S board all read 253V instead of 275V. All the other numbers are spot on.
I couldn't resist to do the bias the tubes and plug in a headphone to see if there is any sound coming out, and yes there is. The sound is too good to be true, actually, compared to my Crack and S.E.X... Only one thing I noticed, is that with my HD650, the volume is quite low, I have to turn up all the way to -18db level on the coarse volume pot (and all the way up on the fine pot) to get to my usual listening volume. Is that caused by the lower than expected voltage?
Is there anything wrong with not hitting the 275V mark?
-PH-
I couldn't resist to do the bias the tubes and plug in a headphone to see if there is any sound coming out, and yes there is. The sound is too good to be true, actually, compared to my Crack and S.E.X... Only one thing I noticed, is that with my HD650, the volume is quite low, I have to turn up all the way to -18db level on the coarse volume pot (and all the way up on the fine pot) to get to my usual listening volume. Is that caused by the lower than expected voltage?
Is there anything wrong with not hitting the 275V mark?
-PH-