Loud buzz on 0 volume [solved]

[2wo]

Before you tear everything apart, remove the tube and measure resistance from the center of the RCA  jack, to pins 2 or 7 and from the center RCA to ground, for volume positions 0 and 1...John

 

[Doc B]

If I was just reading this and seeing "when I change tubes I have the problem" then I would say it's a tube pin to socket interface issue. However we are hearing that the problem started when the caps were changed. It isn't intuitive why that would cause the problem, but that was the last event that happened before the problem occured.

 

[Klots]

changed all caps back and now only B4 is 62V and B6 is 84V...all other pins are great, but...still the buzz on 0 vol. AND, I found the problem It is my 5998 tube. I so remembered that with 5998 it was quiet, but no it is not. Will the speedball change something in the circuit for this tube or is it gonna still buzz when I install speedball? I am gonna still use the 5998 tube, but I just wont turn to 0 volume. Thanks everyone and  :-[ 

 

[JamieMcC]

changed all caps back and now only B4 is 62V and B6 is 84V...all other pins are great, but...still the buzz on 0 vol.

Have you a different input tube to try as I seem to recall having some similar discrepancies in my voltage checks which turned out to be due to the 12au7 input tube. After  I swapped it for a different one and the voltages measured within a couple of percent of those in the manual .

 

[Klots]

Have you a different input tube to try as I seem to recall having some similar discrepancies in my voltage checks which turned out to be due to the 12au7 input tube. After  I swapped it for a different one and the voltages measured within a couple of percent of those in the manual .

Seems I was modifying my post when you answered 

 

[JamieMcC]

Maybe the off voltages from the 12au7 effect the operation of the 5998 resulting in the noise? Just thinking out loud and not really knowing what I'm talking about but hey that's how you find stuff out  :-\

 

[Klots]

Maybe the off voltages from the 12au7 effect the operation of the 5998 resulting in the noise? Just thinking out loud and not really knowing what I'm talking about but hey that's how you find stuff out  :-\

I use E80CC tube. But I tested with 12au7 that came with the crack and same sound. So I test that 0 vol thing again when I install speedball (in January or February).. Yes Jamie I that way you can find stuff out