LEDs not lighting Help Please (solved) New C4S Board

[thdewitt]

I also put in a good 300b from my paramounts. The voltage at b3 is zero while on. 

 

[Paul Birkeland]

Try reheating the center leg of the MJE5731A on the B side of that C4S board.

 

[thdewitt]

Ok.  But I have reheated them all twice. 

 

[thdewitt]

OK, I did it.  The led's still not lit.  :'(

 

[Paul Birkeland]

Heat the solder joint at 11 and remove the wire heading back to the EL84 so that it's out of the t-strip and floating in the air, then retest.

 

[thdewitt]

Hello, before I got your last post, i removed the whole C4S and swapped to the other side.  So now the problem has moved to the other side so it is definitely in the wiring of the board or something on the board.  The C4S moved to the B side worked fine.  So the problem followed the board.  Should I still try the test that you just posted based on the new information.