I’m stuck—275vDC [resolved]

[Allen]

I am building an Eros. I just completed the power supply board. Checking the DC voltage, all is good on the 6.3vDC tabs.
But I am getting nothing at the 275vDC tabs.

I’ve checked my solder joints, everything seems solid.
Where do I start trouble shooting from here?

Many thanks,

Allen the Noob

 

[Paul Birkeland]

Post photos of your build so far and we can have a look.

 

[Allen]

Thank you.
I did powder coat the plate, but I also cleaned it with a drimmel and acetone wherever a metal part contacts it--bare metal on bare metal.

 

[Paul Birkeland]

You are missing some parts on your power supply PC board.

 

[Allen]

Thank you.

 

[Paul Birkeland]

https://www.amazon.com/Hakko-CHP-170-Micro-Cutter/dp/B00FZPDG1K?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&psc=1&smid=ATVPDKIKX0DER
These will help a lot as well. 

 

[Allen]

You are missing some parts on your power supply PC board.

Found it. I overlooked that step probably ten times going back through my work.
vDC tests right. Thank you again