S Swollazn New member Aug 30, 2022 #1 One of my pins broke off the big 10w 3k resistor. I tried to solder it back on but that wouldn't work. Anyone have any ideas how to fix this
One of my pins broke off the big 10w 3k resistor. I tried to solder it back on but that wouldn't work. Anyone have any ideas how to fix this
S Swollazn New member Aug 30, 2022 #2 3K ohm 3KRΩJ 10 watt Axial Ceramic Cement Power Resistor 10W Can i purchase this off amazon and achieve the same thing?
3K ohm 3KRΩJ 10 watt Axial Ceramic Cement Power Resistor 10W Can i purchase this off amazon and achieve the same thing?
Thermioniclife Member Aug 30, 2022 #3 If it is broken off at the body of the resistor you are S.O.L. contact Eileen at Bottlehead for a replacement or order one from a supplier like Mouser. but you will probably save money by ordering from Bottlehead.
If it is broken off at the body of the resistor you are S.O.L. contact Eileen at Bottlehead for a replacement or order one from a supplier like Mouser. but you will probably save money by ordering from Bottlehead.
S Swollazn New member Aug 30, 2022 #4 I ordered a replacement from amazon, it should be the same (ceramic resistor with same specs). But I emailed them just in case if that would work.
I ordered a replacement from amazon, it should be the same (ceramic resistor with same specs). But I emailed them just in case if that would work.
Paul Birkeland Moderator Staff member Aug 31, 2022 #5 If it's a 10W 3K resistor and it fits in the space provided, it will likely work just fine.