mvr_in_london
New member
Hi
I decided to add the Speedball to a perfectly working, nice sounding, Crack
The Crack resistance readings / voltages were spot on (+/- 10%) before the speedball.
After the speedball addition I'm getting the following -
Terminal - Voltage
1 - 178
5 - 178
7 - 178
9 - 170
13 - 178
15 - 200
A1 - 180
A3 - 15
B1 - 180
B3 - 175
B4 - 175
B6 - 176
The rest are fine
If it matters - I am in a 220v country - but I guess not as the transformer takes care of that and the voltages were fine before the Speedball
Help would be much appreciated
Thanks
Mehul
Edit: Just saw the sticky about corrections to the manual re: Terminals 19-21
I decided to add the Speedball to a perfectly working, nice sounding, Crack
The Crack resistance readings / voltages were spot on (+/- 10%) before the speedball.
After the speedball addition I'm getting the following -
Terminal - Voltage
1 - 178
5 - 178
7 - 178
9 - 170
13 - 178
15 - 200
A1 - 180
A3 - 15
B1 - 180
B3 - 175
B4 - 175
B6 - 176
The rest are fine
If it matters - I am in a 220v country - but I guess not as the transformer takes care of that and the voltages were fine before the Speedball
Help would be much appreciated
Thanks
Mehul
Edit: Just saw the sticky about corrections to the manual re: Terminals 19-21