Help, please. 1.27k ohm resistor readings. What I thought was... [resolved]

[dmhenley]

A channel imbalance based on very low listening levels is something else. My mistake.
The right channel is working, though at a lower level than the left. All instruments that should be centered are left/center. Vocals, for example.

New resistance readings found A6@ 8.20k ohms.
Other readings were within tolerance.

Do I need to replace the 1.27k ohm resistor?

Appreciate your time,
Darren

 

[Paul Birkeland]

New resistance readings found A6@ 8.20k ohms.
Other readings were within tolerance.

Do I need to replace the 1.27k ohm resistor?

Your 1.27K resistor is where your 8.2K resistor should be.

-PB

 

[dmhenley]

Wow. Sorry about that. Good grief.

 

[Paul Birkeland]

Wow. Sorry about that. Good grief.

Those little blue resistors are pretty easy to mix up.  If the 8.2K doesn't reach, you can e-mail replacement parts about getting a replacement. 

-PB

 

[dmhenley]

Thank you for your help!

Issue resolved, so I went ahead and installed the C4S upgrade.