Help! Mistakes were made...Assembly of Crack Amp Kit [resolved]

[zaramon]

Ok, I measured the voltage between the ground and the black wire connecting to (L) as shown in the picture (I circled it) and got a reading of < 1V.

 

[Paul Birkeland]

Your fuse is blown or not installed correctly.

 

[zaramon]

Excellent! I'll start looking at that. Thank you for taking the time to work with me on this. Your time is very much appreciated!

 

[zaramon]

Thank you, Paul. The fuse does not have continuity. I couldn't see any breaks through the glass, but obviously it's not making a connection. Thanks again for helping me out!

 

[Paul Birkeland]

Do report back when you have a fresh fuse to let us know that all is well.

-PB

 

[zaramon]

I most certainly will. Just placed an order for additional fuses that should arrive Saturday. Thanks again so much, you make the world a better place!

 

[zaramon]

Quick update on my build, I finished it and could not be more thrilled/happy/excited with the outcome. The reward of the assembly combined with the superior quality of the sound from this very functional device is difficult to describe in words. Everyone that has listened to it leaves in shock and then disappointment in whatever sound setup they currently have. I'm so glad I stumbled across this and thank you for putting out QUALITY. A very special thank you to Paul Birkeland for helping me troubleshoot a blown fuse, after which I was off to the races. Thanks again, Paul Birkeland!!!

 

[Paul Birkeland]

I'm glad it was smooth sailing after the blown fuse!