Eros 2

[benzxc]

Does anybody know the dimensions of the Eros 2 and BeePre 2? Apologies if this information is available but I cannot seem to locate it on the site or forum.

I caught the DIY bug after building the Pipettes (reminded me of how fun it was to build the Crack and Stereomour II that I built like 4-5 years ago), and I am dying for something that I can take out my soldering station out. So I am trying to find a new project to do. I don't really need a new phono or preamp but if it fits...

 

[hmbscott]

Most kits list the chassis plate size. But nowhere is the base size listed. It runs 1-1/4" wider and deeper than the chassis plate, and is 3-3/4" tall feet included. The overall hight including items sticking above the chassis plate is highly variable depending on the kit, but most typically will be the tubes.

 

[Doc B]

Chassis panel is 8"x12" so base is a bit shy of 9.5" x 13.5". About 6" tall.

 

[benzxc]

Thanks! Can I also get the dimensions for the BeePre 2 as well? Especially the height with the stock tubes. I know 300Bs run quite hot so I need to make sure I have enough top ventilation.

 

[Doc B]

BeePre2 is about 11.5"Dx17.5"Wx9" H. Allow an inch or two clearance above that for air flow.