Crossover inductors

[vetmed]

I have a couple of 4 mH iron core inductors. I need a couple of 2.2 mH inductors. Any ideas on how to transform one into the other? Keeping in mind that the only measuring instrument I have is a volt-ohm meter, no oscilloscopes or signal generators available here. TIA

Regards
  Robert Lees

 

[johnsonad]

You will need a meter that can measure inductors. To change the value you simply cut them down until you have the desired value.

 

[Paul Birkeland]

I have a couple of 4 mH iron core inductors. I need a couple of 2.2 mH inductors. Any ideas on how to transform one into the other?

Two 4mH inductors in parallel will give you 2.0mH, which may just be close enough.

 

[vetmed]

There are meters for such things   I do need 2 so parallelling them up won't work.


Thanks
  Robert Lees