Continuity Question

[Jimb0]

Tested the continuity but I'm getting 0.001 for all three pins
I set my voltometer to AC/2v like in the picture

Is this okay?

 

[Doc B]

That's the wrong end of the knob you're looking at. It's pointing to the continuity setting in the ohms scales at about 7:30 rather than the 2VAC scale at 1:30. If you don't have a continuity beeper on your meter you can just use your lowest ohms scale.

 

[Jimb0]

perfect thanks Doc! I got 0.3 ohms for each reading

 

[Doc B]

Sounds like you're good to go.