Capacitor Size

[Yoder]

I am doing a mod on a component (non-BH) and am replacing a 100uF 63v capacitor. It is suggested that I replace the cap with a 220uF one. I have a 220uF cap, but only in 250v form. The larger sized cap will fit in the component, but I am wondering if the additional voltage headroom will have any negative effect(s)? Thanks

 

[Paul Joppa]

No problem. The worst that is likely to happen is that, after some time, the 250v cap will not happily take 250v any more - but it will still take 63v or more. Just be careful about re-using it in another circuit!

 

[Yoder]

Many thanks for the info.