I'm on the home stretch of assembly. On page 62, it says "Attach and solder the red wire from A6 to the Kreg position on the A side of the circuit board."
I don't see where that wire would have been put in. There is a white wire at A8, and I don't see where that gets attached to the board. It looks to me like it's A8 To KregA. KregB already is going to A2 via a white wire.
James
I don't see where that wire would have been put in. There is a white wire at A8, and I don't see where that gets attached to the board. It looks to me like it's A8 To KregA. KregB already is going to A2 via a white wire.
James