lmalinofsky
New member
Hi all, I got my Stereomour kit last week and am about to start the point-to-point wiring underneath. I notice the black and red hookup wire supplied is much narrower gauge than that shown in the manual. I assume this nevertheless is going to work as well in terms of handling necessary current, etc.? I'm certainly not complaining-- this wire looks easier to work with.
I have a pair of Klipsch corner horns manufactured in 1972, all original drivers and crossover. I'm wondering what impedance I should wire the output transformers for... I had always been told these were 16 ohm speakers, though I note the current production models are represented as 8 ohms. I wonder whether anyone with K-Horns has experimented with 8 vs. 16 ohms to see which is better. In the meantime I'm scratching my head wondering how to wire these things!
Any advice most welcome!
Thanks,
Leon
I have a pair of Klipsch corner horns manufactured in 1972, all original drivers and crossover. I'm wondering what impedance I should wire the output transformers for... I had always been told these were 16 ohm speakers, though I note the current production models are represented as 8 ohms. I wonder whether anyone with K-Horns has experimented with 8 vs. 16 ohms to see which is better. In the meantime I'm scratching my head wondering how to wire these things!
Any advice most welcome!
Thanks,
Leon