41PL removal-newbie mistake

[tipatina]

I disabled the loctal mechanism as per the manual but when I plugged in the tubes they were loose. So I crimped it a little and tried again and now they are in and locked good. I realize I'll need to be able to remove them some day. Any hints???

 

[Paul Birkeland]

You can flip the Smash over and press them out from the bottom side.  I'd worry about this when the tubes actually die, which could be a very long time.

 

[tipatina]

Thanks for the advice. It looks like the 4P1L tubes may be less visible from underneath after Smashup installation but I guess still accessible?

 

[Paul Birkeland]

Yes, you may have to unscrew a board.

A tiny flathead screwdriver may be able to pry the tube out as well.

 

[tipatina]

Thanks, that worked