Will connection foreplayIII to speaker damage it

[ralph]

My poweramp just died. I am in the process of building a new amp but a week or two from competition. Will it harm the FP to try to drive the speakers 94db with it?


Just don't know how it will do into 8 ohms


Thanks

Ralph

 

[randy@matrixq.com]

The recommended output load is 10K.  8 ohms is a long way off.  I'm not knowledgeable enough to tell you what the problems might be, but I can imagine that it would be a bit problematic.

 

[ralph]

My thoughts exactly. Think I will just finish the GC
thanks,
Ralph

 

[Paul Joppa]

It won't hurt anything. The current capability is far short of what a speaker wants; an output transformer would help a lot. I'd try a line transformer and experiment with the primary taps. Radio Shack has one, catalog 55013095 - it's $10; not the cheapest around, but probably the easiest to find. If it's the same as the version I tested several years ago, it's pretty good - similar to the SPECO we used for some years in Paramour and SEX. You might get conversational-level sound; not loud but audible. Sounds like a fun experiment.