Voltage Check

[Ivan303]

page 19  Voltage check

183.2 VDC on both pin 1 and 11?

Close enough to approximately 150 V?

Haven't put it back into the system.

 

[Paul Birkeland]

Yes, what you don't want to see is something super low compared to the 150V reference.

 

[Ivan303]

Great.

Have  124V on both plates (6 and 16) and about 12.5VDC on both cathodes so a whopping 112V across the 300B.

Will now listen.

Thanks!!!!!

 

[Paul Birkeland]

When you only need to swing a few volts at the plate, not a whole lot of plate voltage is required