Speedball R&R - circular pads pulled off PCB. No big deal?

[Downhome Upstate]

Guess a couple of joints weren't well-heated when I removed wires from the Speedball boards.

On the side of the board where the wire used to be, the tiny circular pad pulled loose when I pulled the wire.  :-\

The traces to which the pads attached are okay (not delaminated).

Just keep going, or time to get new boards (and some components to match)? 

 

[Doc B]

If the pads are still attached to the traces you can try reattaching them to the board with a tiny dot of superglue. Otherwise be careful resoldering, it's easy to tear the pad from the trace.