Sorry for being a moron. Is this the right part? Eros build

[gregoryahunter]

I should probably know this - but I'd rather ask than have to remove something I soldered in because Im not very good at removing solder!

The picture in the assembly manual shows a white rectangular box as the "270W 5W wirewound resistor" (pic attached).  I dont have anything like that in my kit.  I have a green 270 Ohm 5W resistor (pic attached).

I assume that the "270W" in the manual is a misstype and the green 270 Ohm resistor that I have is the correct part? 

Thanks in advance

 

[fullheadofnothing]

Yes

 

[gregoryahunter]

THANKS!

 

[bsadowski]

I should probably know this - but I'd rather ask than have to remove something I soldered in because Im not very good at removing solder!

The picture in the assembly manual shows a white rectangular box as the "270W 5W wirewound resistor" (pic attached).  I dont have anything like that in my kit.  I have a green 270 Ohm 5W resistor (pic attached).

I assume that the "270W" in the manual is a misstype and the green 270 Ohm resistor that I have is the correct part? 

Thanks in advance

I also have noticed the same thing and asked the same question in an email to bottlehead wondering if the part was missing in my kit.  So if you are a moron...you're not the only one 

 

[Doc B]

Yup, that's the correct substitute.