Slightly high voltages in speedball large board

[Th3RadMan]

Everything in my build so far has worked perfectly.  At the final voltage check for the large board I noticed the oa and ob terminals were reading 108-109v.  The manual says 75-100v, so I wanted to come here to check to see if this is ok or not.  I can post pics or any other info if there is an issue.

Thanks!

 

[Paul Birkeland]

That is close enough to be OK. 

-PB

 

[Gweldin]

What about 115v at both OA and OB? Still ok?

 

[Paul Birkeland]

What about 115v at both OA and OB? Still ok?

What are your OA and OB voltages on the small board?