Resistance check - T19 [resolved]

[Stc4life]

Hi all - Just finished my assembly. All of my resistance readings are correct, other than T19, which is reading between 34.8k to 106k, depending on where I have the balance pot set. I reflowed all of the junctions adjacent and a number of additional spots in the ground path. Any ideas why I’d be getting just this one reading off?

 

[Paul Birkeland]

Your balance pot wiring is incorrect. One of the black wires isn't landing where it should be.

 

[Stc4life]

Thank you! That was it. Working great now.

I had a blast building the kit and the support here has made me a customer for life.