Power on and off observation

[Thoburn]

Hi all,

I have noticed that when I turn on my Stereomour I get the normal startup noise, but it always goes silent in the right channel about half a second before the left. And, when powering down, the right chanel goes silent about half a second before the right. I don't think it is a problem, but it is a little odd. Anyone have an idea why that would be.

 

[Grainger49]

That would probably be the difference in the two tubes.  Try swapping the 2A3s from left to right and see if it does the opposite.

I have a brief hum from both of my Paramours but don't pay attention to it any more.

 

[shelby1420]

Hi all,

I have noticed that when I turn on my Stereomour I get the normal startup noise, but it always goes silent in the right channel about half a second before the left. And, when powering down, the right chanel goes silent about half a second before the right. I don't think it is a problem, but it is a little odd. Anyone have an idea why that would be.

Your start up observations are identical to mine, however the shut down of  mine is silent.

 

[2wo]

Don't worry,

Its the nature of tubes. They take time to start up and that time is not measured to the half second...John