Possible Channel Imbalance[Solved]

[XforceVesa2]

You're the only one...

I did leave space in the layout to add feedback resistors, which would tighten up the channel balance.

Ok..(I thought that some Imbalance is normal on this Amp(So I have misunderstood this))  :/

If I want to add feedback resistors in this circuit where must they placed?

Before I consider to add feedback resistors in this circuit, should I resolder the solder joints from the Input Tube Socket and from the High Current PC Boards?

 

[Paul Birkeland]

No, I meant that most builders wouldn't be bothered by half a dB of imbalance. 

 

[XforceVesa2]

No, I meant that most builders wouldn't be bothered by half a dB of imbalance.

Ok... now I got it.

As this is no real issue, this thread can be seen as Solved and I want to apologize for my nitpicking with the Channel Balance as I'm just waste your and my Time, to fix an Issue what's not an real issue.(As I have tested it for myself that I shouldn't be able to hear this Imbalance).