No output

[Knightstick]

Hello I have been using my Stereomour for a couple months when I decided to move it. I reconnected my speakers it stopped playing correctly on the right channel. I checked everything to see that if there wasn't a problem before the amp. I then turned the amp on again and both channels were dead silent. I also tried different rca inputs that didn't work either. I've checked over my solder joints and they seem okay. Any help would be great.

 

[Doc B]

Make sure the spade lugs on your speaker cables are making contact with the metal of the binding posts.

 

[Knightstick]

I've done that and there is no change. Also I connected another amp to speakers and it there's output.

 

[Paul Birkeland]

I would perform the voltage checks in the manual and let us know any that are off.

 

[Knightstick]

Thank you so much for your help. I solved the issue.

 

[Paul Birkeland]

Don't leave us hanging?  What happened?

 

[Knightstick]

Sorry bout that. It was something with how it was connected outside the amp. All my voltages checked out
not sure what happened, only.that I put it back together and it works great again.