New build voltage question

[SeanHolcombe]

Hello.  I just completed my Stereomour (first amp build).  (2A3 120V) All my resistance readings are in range and all voltages are in range with the following exception:  all points that are spec'ed at "165-220" are reading low by a factor of 10.

Terminal    Voltage        Spec
    2                17            (165 - 220) 
  14              18              "
  OA              22              "
  OB              22              "

I appreciate any advice on where to look. 
thanks
-sean

 

[fullheadofnothing]

Check the parts on the small board for orientation and correct value.

 

[SeanHolcombe]

thanks for the reply.  turns out, it was just a lousy volt meter. all readings are good now.