Just finished building the Crack - resistances and voltages good but when I fired her up, all that I heard on the left channel was a faint buzz. I went back in and resoldered everything remotely related to the output and checked continuity but all appears good and when I hooked it back up there was no change.
I did put in better RCA's, the Dayton 100uf caps and a 100K DACT attenuator so it isn't exactly stock. I checked the resistances through the DACT and the continuity to and from it and all seems good to that point. I also of course checked to see if the problem was upstream by switching the input interconnects without effect.
Have I missed the obvious? Can anybody suggest where to check next?
thanks for your time and expertise
Bryon
I did put in better RCA's, the Dayton 100uf caps and a 100K DACT attenuator so it isn't exactly stock. I checked the resistances through the DACT and the continuity to and from it and all seems good to that point. I also of course checked to see if the problem was upstream by switching the input interconnects without effect.
Have I missed the obvious? Can anybody suggest where to check next?
thanks for your time and expertise
Bryon