Mundorf Supreme Filter Caps - Before and After
- Thread starter jtori
- Start date
Natural Sound
New member
Can you respond with the differences you heard with this capacitor change?
Sure. Mind you, I just performed this mod yesterday so my impressions may not yet be fully formed. In initial assessment, however, is that things sound slightly smoother and there is a little more bottom end. To me, it's an improvement. Listening with the Sennheiser 800S, I'm in a happy place.
For reference, my chain is: Windows PC/Windows 10/JRiver 24 --> Oppo 105D --> Mainline --> Sennheiser HD800S.
Best,
Joe.
For reference, my chain is: Windows PC/Windows 10/JRiver 24 --> Oppo 105D --> Mainline --> Sennheiser HD800S.
Best,
Joe.
The Mainline is transformed (capacitated?). I've listened now for a few days and can honestly say I'm blown away by what the Mainline is capable of. I've listened with both the HD800S and the ZMF Auteur and am just intoxicated by the sound; on both phones it is captivating: Smooth but revealing. Possessing punch when required. Thanks, BH, for allowing room to accommodate this upgrade!
raymondp1138
Member
I also replaced the stock output caps with the same Mundorf Supremes. Honestly, I did not detect any difference (using HD650's). When I replaced the electrolytic output caps in the Crack with film caps I could easily hear a difference. My theory, applicable to me, is that going from one type of film cap to another probably won't make any detectable differences, especially without any proper a/b testing. That's a good thing for my wallet.
It good to see the Auteur mating well with the Mainline. I'm thinking of getting the Aeolus, which I hear is a bit warmer compared to the Auteur.
It good to see the Auteur mating well with the Mainline. I'm thinking of getting the Aeolus, which I hear is a bit warmer compared to the Auteur.
No. I use the Mundorf Supreme 10uf SGO's in my Mainline but have to warn you that they don't fit as nice as these do.
They are 1-2mm too big in diameter to fit between the boards and the chokes.
The sound is better / different but not worth the investment imo.
A pair of Russian 10uf K75-10 250V could be a good and cheap alternative.
They are 1-2mm too big in diameter to fit between the boards and the chokes.
The sound is better / different but not worth the investment imo.
A pair of Russian 10uf K75-10 250V could be a good and cheap alternative.
itsikhefez
New member
Raymond P. said:
I'm using the Aeolus with the Mainline and its a great match IMO
truong_guitar
New member
Hi all,
Can I use capacitor 2.2uF? How is it difference with 10uF?
Can I use capacitor 2.2uF? How is it difference with 10uF?
Hello,
I have been looking on ebay for bigger value K75-10. They are getting more difficult to find. So far, for me they give the right sound. It might take a few hours before they show all their virtues.
If you can find them i would surely try them before going to invest in '' audiophile '' caps. I still have lots of them like MIT but they all end up in the attic.
Greetings, Eduard
I have been looking on ebay for bigger value K75-10. They are getting more difficult to find. So far, for me they give the right sound. It might take a few hours before they show all their virtues.
If you can find them i would surely try them before going to invest in '' audiophile '' caps. I still have lots of them like MIT but they all end up in the attic.
Greetings, Eduard
If you are OK with very little bass coming out of the headphone jack, then 2.2uF would be OK. The Mainline works well with 10-20uF.truong_guitar said:
Similar threads
