Adrian
New member
Completed my latest BH project. Adding the Mainline HP amp to my BH family required me to temporarily bench may Crack and S.E.X 2.1 due to available real estate.
This was a very enjoyable project. I went real slow and spent about 1-2 hours a sitting over several days.
I kept the "black on black" scheme with the same ebony stain for the base.
I'm using my 3 output modded Submissive as my input selector and main volume control.
I set the Mainline controls to 0db and adjust the volume on the Submissive. There is some minor loss in gain with this setup but I don't perceive any degradation of the audio signal.
This amp sounds fantastic; however, after a longer run down the road I might upgrade the para-feed caps to the ones I have in both my S.E.X amps.
This was a very enjoyable project. I went real slow and spent about 1-2 hours a sitting over several days.
I kept the "black on black" scheme with the same ebony stain for the base.
I'm using my 3 output modded Submissive as my input selector and main volume control.
I set the Mainline controls to 0db and adjust the volume on the Submissive. There is some minor loss in gain with this setup but I don't perceive any degradation of the audio signal.
This amp sounds fantastic; however, after a longer run down the road I might upgrade the para-feed caps to the ones I have in both my S.E.X amps.