Mike F1
Member
Attached is a picture (and info) of my latest project, Stereo 6DN7 SE.
Most of the pieces were made up of left over's from past projects!
Specs:
-2 - GE 6DN7 (power sections running @ 28mA dissipating 8.8watts)
-Magnaquest TFA-204, (multi tap 4,8&16ohm)
-Re-purposed Hammond Organ PT 350-0-350 @ ~175mA
-Sprague filter caps
-Auricap coupling cap's
-DC heater supply
-Baltic Birch Cab (Min-wax Honey Pine Stain)
-Aluminum top plate painted "Hammer-tone" (my days of polishing aluminum are over!!!!)
-Chassis 10" x 10" (to accommodate the larger transformers)
A lot of time (several evenings) spent adjusting voltages, listening, measuring...etc... still will probably tweak things a bit more.
I'm really impressed in the way these tubes perform. If this is what "real" 45's sound like I might have to convert my 2A3 Paramour's to 45's.
Very nice sounding amp & dead quiet!
It's a keeper!
M
Most of the pieces were made up of left over's from past projects!
Specs:
-2 - GE 6DN7 (power sections running @ 28mA dissipating 8.8watts)
-Magnaquest TFA-204, (multi tap 4,8&16ohm)
-Re-purposed Hammond Organ PT 350-0-350 @ ~175mA
-Sprague filter caps
-Auricap coupling cap's
-DC heater supply
-Baltic Birch Cab (Min-wax Honey Pine Stain)
-Aluminum top plate painted "Hammer-tone" (my days of polishing aluminum are over!!!!)
-Chassis 10" x 10" (to accommodate the larger transformers)
A lot of time (several evenings) spent adjusting voltages, listening, measuring...etc... still will probably tweak things a bit more.
I'm really impressed in the way these tubes perform. If this is what "real" 45's sound like I might have to convert my 2A3 Paramour's to 45's.
Very nice sounding amp & dead quiet!
It's a keeper!
M