issues with resistance check [resolved]

[riskybusiness]

Hello,

finished my crack build but when applying the resistance check I am getting the wrong measurements. for instance when black lead on u12 and testing the ground my values are 1.35ohms, and when testing u12 and terminal 3 value is 1.32 ohms. what can be my issue?

thank you

 

[Tom-s]

If you touch your test leads together. What's the resistance it reads?

 

[riskybusiness]

ok yes, i get the same value of 1.37ohms

 

[Tom-s]

Hope this helped and you can now safely continue your journey with the Crack.

Good luck!

 

[riskybusiness]

Yes it did. Thanks