I have the iron upgrade and I have one question. PJ says
"The same goes for the output transformer primary; the dot goes to the parafeed cap and the other terminal goes to the middle terminal of the hum pot. The secondary is marked "c - 8 - 16" and C is the black output binding post. The wire from the red binding post goes to 8 or 16 depending on what impedance your speakers are."
My question concerns the output primary. There are two terminals, one marked PLATE and one marked AC GROUND. Am I correct in assuming that PLATE goes to the parafeed cap and AC GROUND goes to the middle terminal of the hum pot?
"The same goes for the output transformer primary; the dot goes to the parafeed cap and the other terminal goes to the middle terminal of the hum pot. The secondary is marked "c - 8 - 16" and C is the black output binding post. The wire from the red binding post goes to 8 or 16 depending on what impedance your speakers are."
My question concerns the output primary. There are two terminals, one marked PLATE and one marked AC GROUND. Am I correct in assuming that PLATE goes to the parafeed cap and AC GROUND goes to the middle terminal of the hum pot?
