High Raw B+ voltage

[atul.mehta6]

Hello,

I am getting a slightly higher B+ voltage (~ 326.3V) than what is recommended in the manual. My incoming A/C voltage is 120.5V. From previous posts regarding this issue, it should not be a show stopper and I can move along. But just wanted to confirm once more.

Thanks!

 

[Paul Birkeland]

Yes, I would go ahead and keep building. Just be sure that the incoming AC wiring is hooked up properly for the instructions for that voltage range in the manual.

 

[atul.mehta6]

Thanks Paul! Yes.. the transformer windings were done correctly. There were no issues also in the power transformer secondary test. I was getting 9.48 VAC and 119.6 VAC there ...

 

[BrianMid]

Yeah, I am getting 320-321.6 VDC for 123.3V.